Taperbushes
A key or taper lock link is the most frequent shaft-boss joint.
Another frequent shaft-boss joint is the cylindrical taper bush.
The working principle is by means of conical rings that are telescoped and fastened with pins.
The advantage of this option is that neither shaft nor boss needs any machining.
The type of taper bush depends on the measurements and the moment to be transmitted.
KTN can help you to make the right choice.
Delivery programme KTN
• Cilyndrical taper bushes
• Taper bushes with metrical shaft holes
Taper bush type 1008 to 5050
Shaft hole 9 - 125mm
• Taper bushes with inch shaft holes
Taper bush type 1008 to 5050
Shaft hole 3/8" - 5"
Another frequent shaft-boss joint is the cylindrical taper bush.
The working principle is by means of conical rings that are telescoped and fastened with pins.
The advantage of this option is that neither shaft nor boss needs any machining.
The type of taper bush depends on the measurements and the moment to be transmitted.
KTN can help you to make the right choice.
Delivery programme KTN
• Cilyndrical taper bushes
• Taper bushes with metrical shaft holes
Taper bush type 1008 to 5050
Shaft hole 9 - 125mm
• Taper bushes with inch shaft holes
Taper bush type 1008 to 5050
Shaft hole 3/8" - 5"
The above-mentioned shaft-boss joints can be applied to sprocket wheels, gear wheels, timing belt pulleys and V-belts.
